ProStep®              

Integrated Aluminium Safety Stair Nosings.    

Call us on 0356 342 287                  

ProStep® heavy duty integrated safety nosings are manufactured from reinforced aluminum extrusion and anodised to provide building owners with a long term, attractive non-slip safety solution.

Many other products are available on request so allow us to correctly match the most suitable product to your requirement and budget.

Call us today! 0356 342287 quick contact form

  • Available in Five Colours & Four Comprehensive Styles and comes standard with Polymer or Optional Carb Grit Inserts.   
  • Supplied pre-drilled, countersunk and cut to length, with all necessary stainless steel fixing screws, glue and anchors ready to install.

ProStep is designed to provide optimum slip resistance and luminance contrast on the leading edge of stairs in accordance with the Australian Standards AS1428 part 4 and will also protect the stair edge to increase service life of your assets.

If you require an external stair nosing a carb grit insert is highly recommended in a standard square face profile. Internal use will usually only require 50mm wide Polymer inserts. Call your rep today for details!

Descriptions Below Refer to the Pictures on the RHS of this Screen

UM002. Standard square faced, Featured Top in Maroon polymer, 50mm Inlay (Profile dimensions 30mm x 65) Designed for all solid substrates Including some dense carpets. Comes pre-cut, Drilled & Countersunk with fixtures.

UM003CA. New carpet over series, Featured Middle In Yellow Polymer 50mm Inlay (Profile dimensions 75mm x 38mm) Designed to fit Over most carpet substrates. Comes pre-cut, Drilled & Countersunk with fixtures.

UM004BT. Twin insert series, Featured Bottom In Grey Twin Polymer 50mm & 20mm Inlay's (Profile dimensions 90mm x 30). Designed for all solid substrates Including some dense carpets. Comes pre-cut, Drilled & Countersunk with fixtures.

UM008PL. Square faced twin insert photo luminescent, Pic Not Illustrated.10mm luminescent leading edge & 50mm trailing edge Inlay of choice (Profile dimensions 75mm x 30)  Designed for all solid substrates Including some dense carpets. Comes pre-cut, Drilled & Countersunk with fixtures Pic Not Illustrated      

 

Specify ProStep

Quote or simply copy & paste, the appropriate references which are currently located shaded in Grey, How to specify ProStep, in the main menu of this website. Please note you will need to choose between the Carb Grit OR Polymer inserts in the suitable extrusion type.

If your unclear what you require give us a call 0356 342287.                

                                             

Colour Range & Insert Type 

Polymeric / Rubber R10 - Ivory, Black, Grey, Yellow, Red.

Carborundum / Grit R13 - Black, Yellow, Grey. 

 

You are invited to use our quick contact form located in the main menu of this website, or Call 0356 342 287